Datasheet

DC-13   
24 V I
e
A 2
Electromagnetic compatibility (EMC)
Electrostatic discharge (ESD)   
applied standard   IEC EN 61000-4-2, Level 3
Air discharge  kV 8
Contact discharge  kV 6
Electromagnetic fields (RFI)   
applied standard   IEC/EN 61000-4-3
  V/m 800 - 1000 MHz: 10
1.4 - 2 GHz: 10
2.0 - 2.7 GHz: 3
Radio interference suppression   EN 55011, Class A (emitted interference, line-conducted)
EN 61000-6-3, Class A (emitted interference, radiated)
Note on use   This product is designed for operation in industrial environments (environment
2). The use in residential environments (environment 1) could cause electrical
interference so that addition suppression must be planned.
Burst  kV 2
IEC/EN 61000-4-4, level 3
power pulses (Surge)   1 kV (symmetrical)
2 kV (asymmetrical)
according to IEC/EN 61000-4-5
Immunity to line-conducted interference to (IEC/EN 61000-4-6)  V 10
Technical safety parameters:
Notes   Safe switch off.
See Safety manual PU05907001Z.
Ambient temperature  °C 40
Values according to EN ISO 13849-1   
MTTF
d
Years  421
Performance level PL  e
Category   3
Values according to IEC 62061   
   λsd [FIT]: 47
λsu [FIT]: 1582
λdd [FIT]: 269
λdu [FIT]: 2,4
SGF [%]: 99,8
DCS [%]: 2,9
DC [%]: 99
PFH [1/h]: 2,4 x 10
-9
SIL: 3
Notes   Safe switch off.
See Safety manual PU05907001Z.
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 2.4
Heat dissipation per pole, current-dependent P
vid
W 0.7
Equipment heat dissipation, current-dependent P
vid
W 2
Static heat dissipation, non-current-dependent P
vs
W 1
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 60
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
12/28/2018 Eaton 170103 ED2018 V51.0 EN 3 / 6