User Manual

Configuring an easy-NET
network
83
08/04 AWB2528-1423GB
Displaying the Status display of other stations
On every device with a display, you can display the states of
the inputs and outputs of each network station.
X Change to the Status display and press the ESC button.
The cursor changes to the display of the network station NT..
and flashes. The station number is displayed in front of the
inputs and outputs.
X Change to the number of the required station with the Í
and
Ú cursor buttons.
X Press the OK button.
X If you want to view the state of the inputs and outputs of
a local expansion, press the OK button.
If you press the ESC button again or the OK button, the
display of the input and output states of the station is
terminated.
1I12..........
I NT1 P-
MO 06:42
1Q1....... RUN
3I12.....7....
I NT3 P-
MO 06:42
3Q1.3..6.. RUN
3R12.....7....
I NT3 DC P-
MO 06:45
3S1.3..6.. RUN
h
The station showing the status on its display cannot read
its own data from the network.
Example: NT3 flashes on station 3. The inputs and outputs
3I.., 3R.., 3Q.. and 3S.. cannot be displayed.
If the NT3 display is not flashing, the inputs and outputs
are shown.