User Manual

Commissioning
82
08/04 AWB2528-1423GB
Changing the easy-NET network configuration
The configuration of the easy-NET network can be modified
at any time at station 1, physical location 1.
X The NET parameters are modified as described for
inputting parameters for the first time.
Station addresses in the STATIONS menu are changed as
follows:
X Go to the physical location which is to be modified.
X Press the OK button.
X Select the required station number with the Í and Ú
cursor buttons and confirm your input with the OK button.
X Configure all easy-NET stations again using the
CONFIGURATION menu.
h
Existing station numbers can only be modified to free,
non-assigned station numbers. If all eight numbers are
assigned, all station numbers which are to be modified
must be set to zero. Thereafter, all station numbers can be
reassigned. (easy800 sets all station numbers to zero
which are assigned with a physical location behind the
leading zero.)
h
Further information concerning the easy-NET network
topic can be found in Chapter “easy-NET network”,
Page 247.