User Manual

Creating your first circuit

diagram

08/04 AWB2528-1423GB

X Press push-button actuator S2, that has been connected

as a break contact.

The circuit connection is interrupted and relay Q1 drops out.

Figure 46: Power flow display: Input I1 is closed, input I2 is open,

relay Q1 has picked up

= visible area

X Press ESC to return to the Status display.

Power flow display with Zoom function

easy enables you to check the following at a glance:

• all four contacts plus one coil in series

• and 3 circuit connections

X Change to the Circuit diagram display and press the ALT

button. Press push-button actuator S1.

Figure 47: Power flow display in Zoom function: Input I1 and I2

are closed, relay Q1 picked up

â Contact closed, coil is triggered:

# Contact opened, coil dropped out

I 01====I 02-------------------Ä Q 01

L: 1 C:1 RUN

With easy you can test parts of a circuit diagram before it

is entirely completed.

easy simply ignores any incomplete wiring that is not yet

working and only runs the finished wiring.

â==â========Äâ

L: 001 I 01