User Manual

Commissioning
72
08/04 AWB2528-1423GB
Wiring
easy displays a small arrow
l in the circuit diagram when
creating the wiring.
Press ALT to activate the wiring arrow cursor and use the
cursor buttons
Í Ú ú í to move it.
The wiring arrow works between contacts and relays. When
you move the arrow onto a contact or relay coil, it changes
back to the cursor and can be reactivated with ALT if
required.
X Press ALT to wire the cursor from I02 through to the coil
field.
The cursor changes into a flashing wiring arrow and
automatically jumps to the next possible wiring position.
X Press the cursor button í. Contact I02 will be connected
up to the coil field.
h
ALT also has two other functions depending on the cursor
position:
• In the left contact field, you can press ALT to insert a
new empty rung.
• The contact under the cursor can be changed between
a make and break contact by pressing the ALT button.
ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-
ÊÊÊÊlÊÊ-ÊÊÊÊÊÊÊ-
ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-
L: 1 C:1 B:7944
M
l
L
m
h
easy automatically wires adjacent contacts in a rung up to
the coil.
-I 02 l
h
You can use DEL to erase a connection at the cursor or
arrow position. Where connections intersect, the vertical
connections are deleted first, then, if you press DEL again,
the horizontal connections are deleted.