User Manual

Creating your first circuit
diagram
71
08/04 AWB2528-1423GB
From the first contact to the output coil
With easy, you work from the input to the output. The first
input contact is
I01.
X Press OK.
easy proposes the first contact
I01 at the cursor position.
I flashes and can be changed, for example, to a P for a
pushbutton input using the cursor buttons
Í or Ú.
However, nothing needs to be changed at this point.
X Press OK 2 x, to move the cursor across the 01 to the
second contact field.
You could also move the cursor to the next contact field
using the cursor button.
X Press OK.
Again, easy inserts a contact
I01 at the cursor position.
Change the contact number to
I02, so that break contact
S2 can be connected to input terminal I2.
X Press OK so that the cursor jumps to the next position and
press cursor button
Í or Ú to change the number to 02.
X Press OK to move the cursor to the third contact field.
You do not need a third relay contact, so you can now wire
the contacts directly to the coil field.
I 01
L: 1 C:1 B:7944
I 01 Ê
L: 1 C:1 B:7944
I 01 I 02
L: 1 C:2 B:7944
h
You can press DEL to delete a contact at the cursor
position.
-I 02 Ê
L: 1 C:3 B:7944