User Manual

Commissioning

08/04 AWB2528-1423GB

Circuit diagram display

The circuit diagram display is currently empty. The cursor

flashes at the top left, which is where you will start to create

your diagram.

The location of the cursor is indicated in the status line. L: =

Circuit connection (line), C: = Contact or coil (contact), B: =

Free memory available in bytes. Start value 7944, with the

first three circuit connections already generated.

The easy800 circuit diagram supports 4 contacts and one coil

in series. The easy800 display can display 6 circuit diagram

contact fields.

Use the

Í Ú ú í cursor buttons to move the cursor over

the invisible circuit diagram grid.

The first four columns are contact fields, the fifth column is

a coil field. Each line is a rung. easy automatically connects

the contact to the power supply.

Figure 42: Circuit diagram with inputs I1, I2 and output Q1

X Now try to wire up the following easy diagram.

Switches S1 and S2 are at the input.

I01 and I02 are the

contacts for the input terminals. Relay K1 is represented by

the relay coil

ÄQ01. The symbol identifies the coil's

function, in this case a relay coil acting as a contactor.

Q01

is one of the easy output relays.

L: 1 C:1 B:7944

ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-

L: 1 C:1 B:7944

I 01----I 02--...-Ä Q 01

L: 1 C:1 B:7944