User Manual

Creating your first circuit
diagram
69
08/04 AWB2528-1423GB
Starting point Status display
When you switch on easy, it opens the Status display
immediately to show the switching state of the inputs and
outputs. It also indicates whether easy is already running a
circuit diagram.
X Press OK to switch to the main menu.
Press OK to switch to the next menu level, and press ESC to
move one level back.
In this case easy must be in STOP mode.
X Press OK 2 x to enter the circuit diagram display via
menu items PROGRAM… h PROGRAM. This is where
you will create the circuit diagram.
I ............
IP-
MO 02:00
Q........ STOP
h
The examples were written without the use of expansion
units. If an expansion unit is connected, the Status display
will first show the status of the basic unit and then the
status of the expansion unit before showing the first
selection menu.
PROGRAM...
STOP å RUN
PARAMETERS
SET CLOCK
h
OK has two other functions:
• Press OK to save modified settings.
• In the circuit diagram, you can also press OK to insert
and modify contacts and relay coils.
CIRCUIT DIAGRAM
FUNCTION RELAYS