User Manual

Connecting the NET network

08/04 AWB2528-1423GB

Connection cable:

4-pair twisted cable; a chapter “Technical data”,

Page 330

Figure 35: Connection assignment

ECAN_H data cable, pin 1, cable pair A

ECAN_L data cable, pin 2, cable pair A

Ground cable GND, pin 3, cable pair B

Select cable SEL_IN, pin 4, cable pair B

Table 3: Prefabricated cables, RJ45 plug on both ends

Material for self-manufactured cables

100 m 4 x 0.18 mm

: EASY-NT-CAB

Required crimping tool for RJ45 plug: EASY-RJ45-TOOL

Bus termination resistor

The first and last stations in the network must be provided

with a bus termination resistor.

• Value: 124 O

• Termination connector: EASY-NT-R

A1ECAN_H

A2ECAN_L

B 3 GND (Ground)

B 4 SEL_IN

Minimum operation with easy-NET functions with the

cables ECAN_H, ECAN_L and GND. The SEL_IN cable is

only used for automatic addressing.

Cable length Type designation

30 EASY-NT-30

80 EASY-NT-80

150 EASY-NT-150