User Manual

Connecting the inputs

08/04 AWB2528-1423GB

Cable protection

Both easy AC and DC versions require cable protection (F1)

rated for at least 1 A (slow).

Connecting the inputs easy inputs switch electronically. Once you have connected

a contact via an input terminal, you can reuse it as a contact

in your easy circuit diagram as often as you like.

Figure 10: Connecting the inputs

Connect contacts such as push-button actuators or switches

to easy input terminals.

Connecting the AC inputs

When easy is switched on for the first time, its power

supply circuit behaves like a capacitor. Use an appropriate

device for switching on the power supply and do not use

any reed relay contacts or proximity switches.

+24 V

0 V

I1 i1

Caution!

For easy-AC, connect the inputs to the same line as the

power feed in accordance with the VDE, IEC, UL and CSA

safety regulations. Otherwise easy will not detect the

switching level and may be damaged or destroyed by

overvoltage.