User Manual

Installation

08/04 AWB2528-1423GB

For ease of wiring, leave a gap of at least 3 cm between the

easy terminals and the wall or adjacent devices.

Figure 2: Clearances to the easy

. Mounting on mounting rail

X Hook the easy to the top edge of the top-hat rail and hinge

into place while pressing down slightly. Press down lightly

on both the device and the top-hat rail until easy snaps

over the lower edge of the top-hat rail.

The easy will clip into place automatically.

X Check that easy is seated firmly.

easy is mounted vertically on a top-hat rail in the same way.