User Manual

Inside easy
310
08/04 AWB2528-1423GB
Compatibility of different
easy800 versions.
Device compatibility
easy800 is being further developed for you. The new
easy800 devices have more functions than previous devices.
Please note the device version number on the left of the
device.
e.g.: 039000000607 device version 03
To version 03: easy800 1st edition; up to operating system
1.0x
From version 04: easy800 2nd edition; from operating
system version 1.1x
The following functions have been added from device
version 04 upwards.
• COM connection with an MFD-Titan,
• Terminal mode in conjunction with an MFD-Titan,
• BUSY indication in the Status display, PC interface active,
• DISPLAY menu, contrast and backlight setting,
• INFORMATION menu, information about the device
• Zoom in and out of the power flow display,
• D text display function block was developed for displaying
all actual values and for inputting constants,
• BC block comparison function block,
• BT block transfer function block,
• DC PID controller function block,
• FT PT1 signal smoothing filter function block,
• LS value scaling function block,
• NC numerical converter function block,
• PW pulse width modulation function block,
• ST set cycle time function block,
• VC value limitation function block.
h
The new easy800 devices have all the functions of the
previous devices. All programs of the previous devices can
be run on the new devices of the same type. Old programs
can be transferred directly using the memory card.