User Manual

Delay times for inputs and

outputs

295

08/04 AWB2528-1423GB

Behaviour with and without delay time

Figure 128: On-delay for easy-AC

If the debounce delay is switched on, easy checks at 40 ms

(33 ms) intervals whether there is a half-wave present at an

input terminal (1

and 2

pulses in A). If easy detects two

pulses in succession, the device switches on the

corresponding input internally.

If this is not the case, the input is switched off again as soon

as easy does not detect two successive half-waves (1

and

pulses in B).

Figure 129: Push-button with bounce

If a button or switch bounces (A), the delay time may be

extended by 40 ms (33 ms) (A).

If the debounce delay is switched off, the delay time is

reduced.

•On-delay

20 ms (16,6 ms)

•Off-delay for

I1 to I6 and I9 to I12: 20 ms (16.6 ms)

• Off-delay I7 and I8: 20 ms (16.6 ms) with EASY412-AC..

2121

11 21