User Manual

Inside easy

292

08/04 AWB2528-1423GB

When wiring more than four contacts in series, use one of

the marker relays.

Figure 124: Circuit diagram with M 01 marker relay

How easy evaluates the high-speed counters CF, CH

and CI

In order to evaluate the count pulses of 5 kHz, the high-

speed counter function blocks operate with an interrupt

routine. The length of the circuit diagram and the associated

cycle time has no effect on the counter result.

Delay times for inputs and

outputs

The time from reading the inputs and outputs to switching

contacts in the circuit diagram can be set in easy via the

delay time.

This function is useful, for example, in order to ensure a

clean switching signal despite contact bounce.

Figure 125: easy input assigned a switch

easy-DC and easy-AC units function with different input

voltages and therefore also have different evaluation

methods and delay times.

I 01----Q 04----i 03----I 05---Ä M 01

I 02----I 04----M 01-----------Ä Q 02