User Manual

Setting LCD contrast and
backlight
281
08/04 AWB2528-1423GB
Deactivation of card mode
X Select CARD MODE å and press OK.
The RUN mode function is deactivated.
The easy default setting is for display of the CARD MODE
menu, i.e. easy starts in RUN mode without the memory card
when the power is switched on.
Setting LCD contrast and
backlight
The background illumination of the LCD display can be
switched off. The display contrast can be set to one of five
stages. The display is not required during operation. The
backlight only needs to be active during maintenance
operations or when texts have to be displayed.
If the backlight is switched off, it will switch back on when a
button is pressed. The backlight switches off automatically
60 s after the last button is pressed.
The contrast and backlight settings are implemented as
device settings.
X Switch to the System menu.
X Select the SYSTEM menu.
X Press the OK button.
X Use the Ú button to select the DISPLAY menu and press
OK.
DEBOUNCE å Æ
P BUTTONS
RUN MODE å
CARD MODE æ
h
If easy is protected by a password, the System menu will
not be available until easy is “unlocked” (see a Section
“Unlocking easy” from Page 267).
SECURITY Æ
SYSTEM...
MENU LANGUAGE
CONFIGURATOR... æ
P BUTTONS Æ
RUN MODE
CARD MODE
DISPLAY... æ