User Manual

easy Settings
280
08/04 AWB2528-1423GB
Possible faults
easy will not start in RUN mode:
• a program is not available in easy.
• you have selected easy startup in STOP MODE (RUN
MODE menu).
Card startup behaviour
The startup behaviour with memory card is for applications
where unskilled personnel change the memory card under
no-voltage conditions.
easy only starts in the Run mode if a memory card with a
valid program is inserted.
If the program on the memory card is different to the
program in easy, the program from the card is loaded into
easy and easy starts in RUN mode.
X Switch to the System menu.
Activation of card mode
Requirement: RUN MODE is active.
If easy displays
CARD MODE å, this means that when
the power supply is switched on, easy will only start in RUN
mode if a memory card with a valid program has been
inserted.
X Otherwise select CARD MODE and press OK.
easy will start up with the program on the card.
X Press ESC to return to the Status display.
h
If easy is protected by a password, the System menu will
not be available until easy is “unlocked” (see a Section
“Unlocking easy” from Page 267).
DEBOUNCE å Æ
P BUTTONS
RUN MODE å
CARD MODE å æ