User Manual

Startup behaviour
279
08/04 AWB2528-1423GB
X Otherwise select RUN MODE and press OK.
RUN mode is activated.
X Press ESC to return to the Status display.
Deactivating RUN mode
X Select RUN MODE å and press OK.
The RUN mode function is deactivated.
The default setting for easy is for RUN MODE to be
displayed. In other words, easy starts in
RUN MODE å
when the power is switched on.
Behaviour when the circuit diagram is deleted
The setting for the startup behaviour is an easy device
function. When the circuit diagram is deleted, this does not
result in the loss of the setting selected.
Behaviour during upload/download to card or PC
When a valid circuit diagram is transferred from easy to a
memory card or the PC or vice versa, the setting is still
retained.
DEBOUNCE å Æ
P BUTTONS
RUN MODE å
CARD MODE æ
DEBOUNCE å Æ
P BUTTONS
RUN MODE
CARD MODE æ
Startup behaviour Menu display Status of easy after
startup
easy starts in STOP
mode
RUN MODE easy is in STOP mode
easy starts in RUN
mode
RUN MODE å easy is in RUN mode
h
The easy devices without a display can only be started in
RUN mode.