User Manual

easy Settings
276
08/04 AWB2528-1423GB
Activating input delay
(debounce)
Input signals can be evaluated by easy with a debounce
delay. This enables, for example, the trouble-free evaluation
of switches and push-button actuators subject to contact
bounce.
In many applications, however, very short input signals have
to be monitored. In this case, the debounce function can be
switched off.
X Press DEL and ALT to call up the System menu.
X Select the SYSTEM menu.
The input delay (debounce) is set with the DEBOUNCE menu
item.
Activating debounce
If a tick
å is set beside DEBOUNCE, the input delay is set.
If this is not so, proceed as follows:
X Select DEBOUNCE and press OK.
Debounce mode will be activated and the display will show
DEBOUNCE å.
Press ESC to return to the Status display.
Deactivating debounce (input delay)
If easy is showing
DEBOUNCE in the display, this means
that Debounce mode has already been deactivated.
X Otherwise select DEBOUNCE å and press OK.
Debounce mode will be deactivated and the display will
show
DEBOUNCE.
h
If easy is password-protected you cannot open the System
menu until you have “unlocked” it.
DEBOUNCE å Æ
P BUTTONS
RUN MODE
CARD MODE æ
DEBOUNCE å Æ
P BUTTONS
RUN MODE
CARD MODE æ