User Manual

easy Settings
266
08/04 AWB2528-1423GB
Activating the password
You can activate an existing password in three different
ways:
• automatically when easy is switched on again,
• automatically after a protected circuit diagram is loaded
• automatically if a telegram has not been sent on the PC
interface 30 minutes after unlocking the device (using
EASY-SOFT (-PRO),
• via the password menu
X Press DEL and ALT to call up the System menu.
X Open the password menu via the menu option
SECURITY…
easy will only show this password menu if a password is
present.
X Select ACTIVATE PW and confirm with OK.
The password is now active. easy will automatically return to
the Status display.
You must unlock easy with the password before you
implement a protected function, enter a protected menu or
the System menu.
CHANGE PW
ACTIVATE
h
Make a note of the password before you activate it. If the
password is no longer known, easy can be unlocked
(DELETE FUNCTION is not active), however, the circuit
diagram and data settings will be lost.
Attention!
If the password is unknown or lost, and the delete
password function is deactivated: The unit can only be
reset to the factory setting by the manufacturer. The
program and all data are lost.