User Manual

Password protection

265

08/04 AWB2528-1423GB

Selecting the scope of the password

X Press the OK button.

X Select the function to be protected or the menu.

X Press the OK button in order to protect the function or

menu (tick = protected).

• CIRCUIT DIAGRAM: The password is effective on the

program with circuit diagram and non-enabled function

blocks.

• PARAMETERS: The PARAMETERS menu is protected.

• TIME: Date and time are protected with the password.

• OPERATING MODE: The toggling of the RUN or STOP

operating mode is protected.

• INTERFACE: The interface is inhibited for access to a

connected device. Programs or commands to other

devices connected via the NET network are routed further.

• DELETE FUNCTION: After four failed attempts to enter a

password, the “DELETE FUNCTION?” prompt appears.

This prompt is not displayed if selected. However, it is no

longer possible to make changes in protected areas if you

forget the password.

CIRCUIT

DIAGRAM åÆ

PARAMETERS

TIME

OPERATING

MODE æ

Standard protection encompasses the programs and

circuit diagram.

At least one function or menu must be protected.