User Manual

263
08/04 AWB2528-1423GB
6 easy Settings
Settings can only be carried out on easy models provided
with buttons and LCD display.
EASY-SOFT -PRO can be used to set all models via the
software.
Password protection The easy can be protected by a password against
unauthorised access.
In this case the password consists of a value between
000001 and 999999. The number combination 000000 is
used to delete a password.
Password protection inhibits access to selected areas. The
System menu is always protected by an activated password.
The password can protect the following inputs and areas:
• Start or modification of the program
• Transfer of a circuit diagram to or from a memory card
(Display variants).
• Change of the RUN or STOP mode.
• Calling and modification of function block parameters
• All settings of the real-time clock.
• Modifications of all system parameters.
• Communication with the individual device. (looping to
other devices possible.)
• Switching off the password delete function.
h
A password that has been entered in easy is transferred to
the memory card together with the circuit diagram,
irrespective of whether it was activated or not.
If this easy circuit diagram is loaded back from the memory
card, the password will also be transferred to easy and is
activated immediately.