User Manual

Function blocks
209
08/04 AWB2528-1423GB
Circuit diagram symbols for jumps
Function
If the jump coil is triggered, the circuit connections coming
directly after it will not be processed. The states of the coils
before the jump will be retained, unless they are overwritten
in circuit connections that were not missed by the jump.
Jumps are always made forwards, i.e. the jump ends on the
first contact with the same number as that of the coil.
• Coil = jump when 1
• Contact only at the first left-hand contact position = Jump
destination
The Jump contact point will always be set to 1
Contact
Make contact
1)
:
Numbers 01 to 32
Coils Ä
Numbers 01 to 32
Coil function Ä, Å, ä, È, è
1) can only be used as first leftmost contact
h
Backward jumps are not possible with easy due to the way
it operates. If the jump label does not come after the jump
coil, the jump will be made to the end of the circuit
diagram. The last circuit connection will also be skipped.
If a jump destination is not present, the jump is made to
the end of the circuit diagram.
Multiple use of the same jump coil and jump contact is
possible as long as this is implemented in pairs, i.e.:
Coil
Ä:1/jumped range/Contact:1,
Coil
Ä:1/jumped range/Contact:1 etc.