User Manual

Wiring with easy800
142
08/04 AWB2528-1423GB
Example:
Initialising marker blocks, specifying marker ranges directly
The value of marker byte 10 is to be transferred to marker
bytes 20 to 29.
Parameters of BT01 function block:
Source range:
>I1 MB10
Destination range: >I2 MB20
Number of bytes: >NO 10
After a rising edge from 0 to 1 at coil BT01T_ the value 123
is present in the marker bytes MB20 to MB29.
Example:
Initialisation of marker blocks, definition of a range with
offset
The content of marker byte MB15 is to be transferred to
marker bytes MB65 to MB68.
Source range Value of
source marker
range
(decimal)
Destination
range
Value of
destination
marker range
(decimal)
MB10 123 MB20 123
MB21 123
MB22 123
MB23 123
MB24 123
MB25 123
MB26 123
MB27
123
MB28 123
MB29 123