User Manual

Wiring with easy800
106
08/04 AWB2528-1423GB
Deleting contacts and coils
X Move the cursor using the buttons úíÍÚ to a contact or
coil field.
X Press DEL.
The contact or the coil will be deleted, together with any
connections.
Changing make contacts to break contacts
Every contact in the easy800 circuit diagram can be defined
as either a make contact or a break contact.
X Switch to Entry mode and move the cursor over the
contact name.
X Press ALT. The make contact will change to a break
contact.
X Press OK 2 x to confirm the change.
Figure 50: Change contact I03 from make to break
Creating and modifying connections
Contacts and relay coils are connected with the arrow in the
Connect mode. easy800 displays the cursor in this mode as
an arrow.
X Use úíÍÚ to move the cursor onto the contact field or
coil field from which you wish to create a connection.
I 02--u---
I 03--k
I 02--u----
I 03--k
I 02--u----
i 03--kê
ALT
OK
2 x
l
h
Do not position the cursor on the first contact field. At this
position the ALT button has a different function (Insert
rung).