User Manual

easy800 operation
101
08/04 AWB2528-1423GB
• Connections are used to produce the electrical contact
between relay contacts and the coils. They can be created
across several circuit connections. Each point of
intersection is a connection.
• The number of free bytes is displayed so that you can
recognise how much memory is available for the circuit
diagram and function blocks.
easy800 circuit diagram display
For improved readability, the circuit diagram display of the
easy800 shows two contacts per circuit connection or one
contact plus a series coil. A total of 16 characters per circuit
connection and three circuit connections plus a status line
can be displayed simultaneously.
You can move between the contact fields with the
úí cursor
buttons. The number of the circuit connection and the
contact are displayed in the lower status line.
Saving and loading programs
easy800 provides you with two ways of saving circuit
diagrams externally:
• By saving to a memory card
• By saving to a PC running EASY-SOFT (-PRO) with EASY .
Once they have been saved, programs can be reloaded into
easy800, edited and run.
All program data is saved in easy800. In the event of a power
failure the data will be retained until the next time it is
overwritten or deleted.
I 01----I 02---
Q 01----HY01Q1k
L: 1 C:1 B:7840
h
The circuit diagram display performs two functions:
• In STOP mode it is used to edit the circuit diagram.
• In RUN mode it is used to check the circuit diagram
using the Power flow display.