User Manual

Wiring with easy800

08/04 AWB2528-1423GB

The switching behaviour of these relays is set by the coil

functions and parameters selected.

The options for setting output and marker relays are listed

with the description of each coil function.

The function block coil functions and parameters are listed

with the description of each function block type.

Seven-day time switch HW X=01…32 – j

Year time switch function block HY X=01…32 – j

Activate value scaling function block LS X EN X=01…32 j j

Master reset function block MR X T_ X=01…32 j j

Activate numerical converter function

block

NC X EN X=01 32 j j

Function block operating hours

counter, enable

OT X EN X=01…04 j j

Operating hours counter function

block, reset

OT X RE X=01…04 j j

Send to the network (easy-NET)

function block, trigger

PT X T_ X=01…32 j j

Activate pulse width modulation

function block

PW X EN X=01…02 j j

Send time to the network (easy-NET)

function block, trigger

SC X T_ X=01 j –

Activate set cycle time function block ST X EN X=01

Timing relay function block,

trigger control coil (enable)

T X EN X=01…32 j j

Timing relay function block, stop

T X ST X=01…32 j j

Timing relay function block, reset T X RE X=01…32 j j

Activate value limitation function

block

VC X EN X=01…32 j j

Relay/function block easy800

display

Number Coil Parameter