Datasheet

10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Meets the product standard's requirements.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
PLC's (EG000024) / Logic module (EC001417)
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / Logic module (ecl@ss10.0.1-27-24-22-16 [AKE539014])
Supply voltage AC 50 Hz  V 0 - 0
Supply voltage AC 60 Hz  V 0 - 0
Supply voltage DC  V 20.4 - 28.8
Voltage type of supply voltage   DC
Voltage type of supply voltage   DC
Switching current  A 0.5
Number of analogue inputs   4
Number of analogue outputs   0
Number of digital inputs   8
Number of digital outputs   4
With relay output   No
Number of HW-interfaces industrial Ethernet   1
Number of interfaces PROFINET   0
Number of HW-interfaces RS-232   0
Number of HW-interfaces RS-422   0
Number of HW-interfaces RS-485   0
Number of HW-interfaces serial TTY   0
Number of HW-interfaces USB   0
Number of HW-interfaces parallel   0
Number of HW-interfaces Wireless   0
Number of HW-interfaces other   1
With optical interface   No
Supporting protocol for TCP/IP   Yes
Supporting protocol for PROFIBUS   No
Supporting protocol for CAN   No
Supporting protocol for INTERBUS   No
Supporting protocol for ASI   No
Supporting protocol for KNX   No
Supporting protocol for MODBUS   Yes
Supporting protocol for Data-Highway   No
Supporting protocol for DeviceNet   No
Supporting protocol for SUCONET   No
Supporting protocol for LON   No
06/13/2019 Eaton Y7-197213 ED2019 V57.0 EN 5 / 7