Product Brochure

Air Conditioning Disconnects
Fused and Non-Fused
Pullouts
•
ON/OFF control provided by a
pullout handle
•
Pullout handle can be conve-
niently stored in the compart-
ment in the OFF position,
helping to prevent the handle
from being misplaced
•
Protective shield cannot be
removed until the pullout
handle is removed,
disconnecting the power
Molded Case Switch
•
Rugged molded case
construction in a disconnect
switch that looks like a circuit
breaker but operates like
an ordinary household light
switch
•
Plug-in molded case switch
(included) eliminates the need
for pullout handles
•
No need for replacement
pullout handles due to loss
or theft
Eaton’s product offering:
•
3 Standard Designs:
• Non-Fused
• Fused
• Molded Case Switch
•
Enclosure:
• NEMA 3R (outdoor)
• Metallic (galvanized/painted)
• Non-metallic (plastic)
•
Ratings:
• Single-phase, two-wire,
240Vac
• Three-phase, three-wire,
240Vac
• 30 and 60 amps
•
Optional ACDs with Ground
Fault Receptacles or Weather-
Resistant/Tamper-Resistant
Receptacles are available
Eaton Air Conditioning Disconnects
Air Conditioning Disconnects
(ACD) are located between
a loadcenter (distribution
panel) and an air
conditioner. ACDs provide
a visible disconnecting
means when perform-
ing maintenance and are
commonly referred to as
disconnects, pullouts or air
conditioning switches.
Applications:
•
Air conditioners
•
Heat pumps
•
Water heaters
•
Other locations where a local
disconnect is required