Cut Sheet

ManualsBrandsEaton ManualsControl & AutomationPowerXL DM1 Series Micro Drive, APAC, 1.6A

Eaton is a registered trademark.

All other trademarks are property

of their respective owners.

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Printed in USA

Publication No. PA040028EN / Z24227

November 2020

Catalog numbering system

D M 1 – 3 4 4D3 E B – S 20 S –

Basic naming

D = Drive

Device series

M = Machinery

Phase reference

1 = Single-phase input/

three-phase output

3 = Three-phase input/

three-phase output

Input voltage

1 = 115 V (100–120 V, +10%/–15%)

2 = 230 V (200–240 V, +10%/–15%)

4 = 400 V (380–480 V, +10%/–15%)

5 = 600 V (575–600 V, +10%/–15%)

Region

Blank = U.S.

EM = EMEA

AP = APAC

IP rating

20 = IP20

Output current rating (single-phase)

100–120 V 200–240 V

1D6 = 1.6 A, 0.25 hp, 0.18 kW

3D0 = 3.0 A, 0.5 hp, 0.37 kW

4D8 = 4.8 A, 1.0 hp, 0.75 kW

6D9 = 6.9 A, 1.5 hp, 1.1 kW

1D6 = 1.6 A, 0.25 hp, 0.18 kW

3D0 = 3.0 A, 0.5 hp, 0.27 kW

4D8 = 4.8 A, 1.0 hp, 0.75 kW

7D8 = 7.8 A, 2.0 hp, 1.5 kW

011 = 11 A, 3.0 hp, 2.2 kW

017 = 17.5 A, 5.0 hp, 4.0 kW

Input ratings

Description Specification

Rated input voltage 1 = 115 V (100–120 V, +10%/–15%)

2 = 230 V (200–240 V, +10%/–15%)

4 = 400 V (380–480 V, +10%/–15%)

5 = 575 V (525–600 V, +10%/–15%)

Voltage tolerance –15%/10%

Input frequency 50 Hz to 60 Hz (variation up to 45 Hz to 66 Hz)

Input THD >120%

Connection to power Once per minute or less frequent

Boot delay 3 s

Short-circuit

withstand rating

100 kAIC (fuses and circuit breakers); 65 kAIC (Type E CMC);

14 kAIC (miniature breakers); 5 kAIC (all)

Power ride-through 100 ms

Logic control ride-through 0.5 s min, 2 s typical

Frequency tolerance 45 Hz to 65 Hz

Total watts loss typical Typical efficiency 97.5% for three-phase

Output ratings

Description Specification

Continuous output current I

: ambient temperature maximum 40 °C,

up to 60 °C with derating, overload 1.1 x I

(1 min/10 min)

: ambient temperature maximum 50 °C,

up to 60 °C with derating, overload 1.5 x I

(1 min/10 min)

Overload current 150% of drive rating for constant torque;

110% of drive rating for variable torque

Initial output current 200% (2 sec/20 sec)

Output frequency 0–400 Hz (standard)

Frequency resolution 0.01 Hz

Maximum cable length See EMC guidelines in Installation Manual

Without EMC considerations: 328 ft (100 m)

Ambient conditions

Description Specification

Operating temperature –10 °C (no frost) to +50 °C, up to +60 °C with derating (CT)

–10 °C (no frost) to +40 °C, up to +60 °C with derating (VT)

Storage temperature –40 °C to +70 °C

Relative humidity 0–95% RH, noncondensing, non-corrosive

Air quality:

•

Chemical vapors

•

Mechanical particles

Tested according to IEC 60068-2-60 test key:

Flowing mixed gas corrosion test, method 1

(H2S [hydrogen sulfide] and SO2 [sulfur dioxide])

Designed according to: IEC 60721-3-3, unit in operation,

Class 3C2

Vibration

•

EN 61800-5-1

•

EN 60068-2-6

Vibration test at operating status

Displacement amplitude: 0.075 mm (peak) at 10 Hz to 57 Hz

Maximum acceleration amplitude: 1g at 57 Hz to 150 Hz

Shock:

•

EN 60068-2-27

Shock test at operating status

Peak acceleration: 15 g

Duration: 11 ms

Transportation

•

ISTA 1 A

Transported as a single device in a separate package

Vibration test and drop test per ISTA 1A

Overvoltage Overvoltage Category III

Pollution degree Pollution Degree 2

Enclosure class IP20 standard in entire kW/hp range;

NEMA Type 1 with accessory kit

Immunity EN 61800-3:2004/A1:2012, first and second environment

Altitude 100% load capacity (no derating) up to 3280 ft (1000 m)

1% derating for each 328 ft (100 m) above 3280 ft (1000 m)

maximum 9842 ft (3000 m)

(2000 m for corner grounded earth main systems)

MTBF 300,000 hours

Product generation

1 = First generation

Control options

B = No STO and no Ethernet

communications

S = STO SI L2 and EtherNet/IP,

Modbus TCP onboard

Output current rating (three-phase)

200–240 V 380–480 V 525–600 V

1D6 = 1.6 A, 0.25 hp, 0.18 kW

3D0 = 3.0 A, 0.5 hp, 0.37 kW

4D8 = 4.8 A, 1.0 hp, 0.75 kW

7D8 = 7.8 A, 2.0 hp, 1.5 kW

011 = 11 A, 3.0 hp, 2.2 kW

017 = 17.5 A, 5.0 hp, 4.0 kW

025 = 25.3 A, 7.5 hp, 5.5 kW

032 = 32.2 A, 10 hp, 7.5 kW

048 = 48.3 A, 15 hp, 11 kW

1D5 = 1.5 A, 0.5 hp, 0.37 kW

2D2 = 2.2 A, 1 hp, 0.75 kW

4D3 = 4.3 A, 2 hp, 1.5 kW

5D6 = 5.6 A, 3 hp, 2.2 kW

7D6 = 7.6 A, 5 hp, 3 kW

012 = 12 A, 7.5 hp, 5.5 kW

016 = 16 A, 10 hp, 7.5 kW

023 = 23 A, 15 hp, 11 kW

031 = 31 A, 20 hp, 15 kW

038 = 38 A, 25 hp, 18.5 kW

4D5 = 4.5 A, 3 hp, 2.2 kW

7D5 = 7.5 A, 5 hp, 3 kW

010 = 10 A, 7.5 hp, 5.5 kW

013 = 13.5 A, 10 hp, 7.5 kW

018 = 18 A, 15 hp, 11 kW

022 = 22 A, 20 hp, 15 kW

Internal brake chopper

B = Brake chopper

N = No brake chopper

Internal EMC filter

E = Internal EMC filter

N = No EMC filter

Display option

N = No display

S = Multi-segment LCD display