Technical Bulletin

Modbus TCP On-Board Communications
20 PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com
Manual IP Address Configuration
Using the PowerXL Drive Keypad
Using the PowerXL Drive Keypad to set the IP Address
manually in the PowerXL EtherNet/IP.
1. Select IP addressing mode as Default static IP
configurations will be loaded.
Note: Change in IP address mode will require PowerXL
to power cycle to get this change effective. Also ensure
device MAC address (Keypad menu. P20.3.5)
Figure 14. Static IP Mode