Technical Bulletin

PROFIBUS-DP External Communication Cards
PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com 97
Configuring Hardware and Communication
Connection Step 7
Before using PowerXL DG1 PROFIBUS Slave on PROFIBUS
network, PROFIBUS Master is needed which can
communicate with PowerXL DG1 PROFIBUS Slave.
The term “configuring” refers to the arranging of racks,
modules, distributed I/O (DP) racks, and interface sub
modules in a station window.
Basic Procedure to configure and assign parameters to a
structure, proceed as shown below.
Figure 43. Basic Procedure