Quick Start Guide

Step 2—Keypad Operation Overview
4 PowerXL DG1 Series Adjustable Frequency Drives MN040012EN—March 2014 www.eaton.com
Left Left Arrow:
• Navigation button, movement to left when editing a parameter digit by digit.
• Backs up one step.
Right Right Arrow:
• Enter parameter group mode.
• Enter parameter mode from group mode.
• Enter parameter whole edit mode when this parameter can be written.
• Enter parameter bit by bit edit mode from whole edit mode.
• Navigation button, movement to right when editing a parameter bit by bit.
OK OK:
• To clear all the Fault History if pressed for more than 5s (including 5s) in any
page.
• This button is used in the parameter edit mode to save the parameter setting.
• To confirm the start-up list at the end of the Start-Up Wizard.
• To confirm the comparison item in parameters comparison mode.
The following is the same with Right key:
• Enter parameter whole edit mode when this parameter can be written.
• Enter parameter group mode.
• Enter parameter mode from group mode.
Stop Stop:
This button operates as motor stop button for normal operation when the “Keypad” is
selected as the control source and keypad stop button is active, or stop button is always
enabled regardless of control source.
• Motor stop from the keypad.
Start Start:
This button operates as motor start button for normal operation when the “Keypad” is
selected as the active control source.
Table 2. Keypad Buttons, continued
Icon Button Description