Firmware Manual

Chapter 5—Standard Application
PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com 45
Notes
1
Parameter value can only be changed after the drive has stopped.
2
Parameter value will be set to be default when changing macros.
P21.1.7 Password 0 9999 0 624
P21.1.8 Parameter Lock 0 625 0 = Change Enable
1 = Change Disable
P21.1.9 Multimonitor Set 0 627 See P21.1.8
P21.1.10 Default Page 0 628 0 = None
1 = Main Menu
2 = Multi-Monitor
P21.1.11 Timeout Time 0 65535 s 30 629
P21.1.12 Contrast Adjust 5 18 12 630
P21.1.13 Backlight Time 0 65535 min 10 631
P21.1.14 Fan Control 3 632 0 = Continuous
1 = Temperature
2 = Run Follow
3 = Calculate Temp
P21.1.15 HMI ACK Timeout 200 5000 ms 200 633
P21.1.16 HMI Retry Number 1 10 5 634
Table 31. Version Info—P21.2
Code Parameter Min. Max. Unit Default ID Note
P21.2.1 Keypad Software Version 640
P21.2.2 Motor Control Software
Version
642
P21.2.3 Application Software
Version
App Firmware 644
Table 32. Application Info—P21.3
Code Parameter Min. Max. Unit Default ID Note
P21.3.1 Brake Chopper Stat 646 0 = No
1 = Yes
P21.3.2 Brake Resistor 647 See P21.3.1
P21.3.3 Serial Number 648
Table 33. User Info—P21.4
Code Parameter Min. Max. Unit Default ID Note
P21.4.1 Real Time Clock 0.0.0.1:1:13 566
P21.4.2 Daylight Saving 0 582 0 = Off
1 = EU
2 = US
P21.4.3 Total MWh Count Mwh 601
P21.4.4 Total Power Day Count 603
P21.4.5 Total Power Hr Count 606
P21.4.6 Trip MWh Count Mwh 604
P21.4.7 Clear Trip MWh Count 0 635 0 = Not Reset
1 = Reset
P21.4.8 Trip Power Day Count 636
P21.4.9 Trip Power Hr Count 637
P21.4.10 Clear Trip Power Count 0 639 See P21.4.8
Table 30. Basic Setting—P21.1, continued
Code Parameter Min. Max. Unit Default ID Note