Firmware Manual

Chapter 3—Menu Overview
24 PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com
1. If password is in use, password shall be needed to check
before edit parameter value.
2. If no action in 1min, the password shall need to be
checked again.
3. If Parameter locked is enabled, *Locked* shall be shown
if user tries to edit the parameter.
Figure 26. Parameter Locked
T1—Favorite
Favorites collect the user’s favorite parameters. User can
add one parameter into favorite list by “FAVORITE” soft key,
and can delete it from favorite list by “DELETE” soft key.
If a parameter has not been added into the favorite list, the
soft keys “FAVORITE” will be shown in parameter page (see
Figure 11 on Page 11). If it has been added into the favorite
list, the soft key “FAVORITE” will not be shown.
If a parameter has been added to the favorite list, it shall
appear in the favorite menu. Then when you enter into the
favorite menu, the soft keys “DELETE” will be shown. This
allows you to remove the selected parameter from favorite
list (see Figure 12 on Page 11).
After one parameter is removed from favorite list, the next
parameter in the favorite list will be selected by default.