Firmware Manual

Chapter 3—Menu Overview
PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com 15
F—Fault
There are three fault pages. The first one is F1 active faults;
the second one is pop-up automatically when fault occurs;
the third one is F2 fault history.
If there is no active fault/history fault, then “No fault” shall be
shown.
After the DETAIL soft key is pressed, the detail information
about the fault shall be shown: fault code, type, current,
voltage, power, torque, DC voltage, unit temperature, run
status, direction, warnings, zero speed shall be shown in
sequence.
Active Fault
The navigation for active faults is as Figure 17.
Figure 17. Active Faults