Firmware Manual

Chapter 2—Keypad Overview
PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com 11
3. For the parameter menu (), if this parameter hasn’t been
added into the favorite list, two soft keys “FAVORITE”
and “MENU” shall be shown. If it has been added into
the favorite list, only one soft key “MENU” is shown in
the right.
If a parameter has been edited and drive needs to reset
so that the new value can become effective, “RESET”
shall be shown, which means user can reset the drive
through this soft key.
See Figure 11.
Figure 11. Parameter Page
4. If one parameter has been added to the favorite list, it
shall appear in the favorite menu. Then when you enter
into the favorite menu, two soft keys “DELETE” and
“MENU” shall be shown, and “DELETE” means you can
delete the selected parameter from favorite list. See
Figure 12.
Figure 12. Parameter Page from Favorite Menu
5. For the fault group, two soft keys “DETAIL” and
“MENU” shall be shown. See Figure 13. For more
information, see Page 15.
Figure 13. Fault Page