Firmware Manual

Chapter 8—Multi-Purpose Application
118 PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com
Notes
1
Parameter value can only be changed after the drive has stopped.
2
Parameter value will be set to be default when changing macros.
P9.11
12
Stall Protection 0 313 0 = No Action
1 = Warning
2 = Fault
3 = Fault, Coast
P9.12
2
Stall Current Limit 0.1 Active Motor
Nom I*2
A Active Motor Nom
I*13/10
314
P9.13
2
Stall Time Limit 1.0 120.0 s 15.0 315
P9.14
2
Stall Frequency Limit 1.00 Par. P1.2 Hz 25.00 316
P9.15
12
Underload Protection 0 317 See P9.11
P9.16
2
Underload Fnom Torque 10.0 150.0 % 50.0 318
P9.17
2
Underload F0 Torque 5.0 150.0 % 10.0 319
P9.18
2
Underload Time Limit 2.00 600.00 s 20.00 320
P9.19
12
Thermistor Fault Response 2 333 See P9.11
P9.20
2
Line Start Lockout 2 750 0 = Disabled, No Change
1 = Enable, No Change
2 = Disabled, Changed
3 = Enable, Changed
P9.21
12
Fieldbus Fault Response 2 334 See P9.11
P9.22
12
OPTCard Fault Response 2 335 See P9.11
P9.23
12
Unit Under Temp Prot 2 1564 See P9.11
P9.24
2
Wait Time 0.10 10.00 s 0.50 321
P9.25
2
Trail Time 0.00 60.00 s 30.00 322
P9.26
2
Start Function 0 323 0 = Ramp
1 = Flying Start
2 = Start
P9.27
2
Undervoltage Attempts 0 10 1 324
P9.28
2
Overvoltage Attempts 0 10 1 325
P9.29
2
Overcurrent Attempts 0 3 1 326
P9.30
2
4 mA Fault Attempts 0 10 1 327
P9.31
2
Motor Temp Fault Attempts 0 10 1 329
P9.32
2
External Fault Attempts 0 10 0 328
P9.33
2
Underload Attempts 0 10 1 336
P9.34
12
RTC Fault 1 955 See P9.11
P9.35
12
PT100 Fault Response 2 337 See P9.11
P9.36
12
Replace Battery Fault
Response
1 1256 See P9.11
P9.37
12
Replace Fan Fault Response 1 1257 See P9.11
P9.38
12
IP Address Confliction Resp 1 1678 See P9.11
P9.39 Cold Weather Mode 0 1 0 2126 0 = No
1 = Yes
P9.40 Cold Weather Voltage Level 0 20 % 2 2127
P9.41 Cold Weather Time Out 0 10 min 3 2128
P9.42 Cold Weather Password 2129
P9.43 Under Temp Fault Override 0 1 0 2130 0 = No
1 = Yes
Table 101. Protections—P9, continued
Code Parameter Min. Max. Unit Default ID Note