Technical Bulletin

BACnet MS/TP—On-Board Communication
72 PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com
Commissioning
BACnet Programming
The navigation path to the fieldbus parameters may differ from application to application.
The exemplary paths below apply to the G-Max HVAC drive.
Figure 35. BACnet Parameter Navigation
1. First ensure that the right fieldbus protocol is selected.
Navigate:
Main Menu R Parameter R Communication R Modbus
RTU/BACnet MS/TP R RS-485 Comm Set R Edit R (Choose
Protocol as BACnet MS/TP)