Technical Bulletin

EtherNet/IP On-Board Communications

58 PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com

Control Supervisor Object, Class 0x29

Table 80. Control Supervisor Object

For Active Fault code, refer “CIP Fault Code” mentioned in “List of Fault

Codes Supported by PowerXL EtherNet/IP.”

Note: When both Run (Run1 & Run2) attributes set, then

no action.

ID Description Data Type Access Rule Default Range

Class Attributes

01h Revision UINT Get 1 —

02h Max Instance UINT Get 1 —

03h Number of Instances UINT Get 1 —

Class Services

0Eh Get_Attribute_Single

Instance Attributes

03h Run1 (RunForward) BOOL Get / Set 0 0–1

04h Run2 (RunReverse) BOOL Get / Set 0 0–1

05h NetCtrl BOOL Get / Set 0 0–1

06h State USINT Get 0 0–7

07h Running1 BOOL Get 0 0–1

08h Running2 BOOL Get 0 0–1

09h Ready BOOL Get 0 0–1

0Ah Faulted0 BOOL Get 0 0–1

0Bh Warning BOOL Get 0 0–1

0Ch FaultRst BOOL Get / Set 0 0–1

0Fh CtrlFromNet BOOL Get 0 0–1

0Dh Active Fault Code

UINT Get 0 0–65535

6Ch Comm Idle Action Value BOOL Get / Set 0 0–1

Instance Services

0Eh Get_Attribute_Single

10h Set_Attribute_Single

05h Reset (Type 0)