Quick Start Guide

Step 5—Standard Parameter List

24 PowerXL DG1 Series Adjustable Frequency Drives MN040012EN—March 2014 www.eaton.com

Notes

Parameter value can only be changed after the drive has stopped.

Parameter value will be set to be default when changing macros.

P21.1.6 Parameter Comparison 0 623 0 = No

1 = Compare with Keypad

2 = Compare with Default

3 = Compare with Set 1

4 = Compare with Set 2

P21.1.7 Password 0 9999 0 624

P21.1.8 Parameter Lock 0 625 0 = Change Enable

1 = Change Disable

P21.1.9 Multimonitor Set 0 627 See P21.1.8

P21.1.10 Default Page 0 628 0 = None

1 = Main Menu

2 = Multi-Monitor

P21.1.11 Timeout Time 0 65535 s 30 629

P21.1.12 Contrast Adjust 5 18 12 630

P21.1.13 Backlight Time 0 65535 min 10 631

P21.1.14 Fan Control 3 632 0 = Continuous

1 = Temperature

2 = Run Follow

3 = Calculate Temp

P21.1.15 HMI ACK Timeout 200 5000 ms 200 633

P21.1.16 HMI Retry Number 1 10 5 634

Table 23. Version Info—P21.2

Code Parameter Min. Max. Unit Default ID Note

P21.2.1 Keypad Software Version 640

P21.2.2 Motor Control Software

Version

642

P21.2.3 Application Software

Version

App Firmware 644

Table 24. Application Info—P21.3

Code Parameter Min. Max. Unit Default ID Note

P21.3.1 Brake Chopper Stat 646 0 = No

1 = Yes

P21.3.2 Brake Resistor 647 See P21.3.1

P21.3.3 Serial Number 648

Table 22. Basic Setting—P21.1, continued

Code Parameter Min. Max. Unit Default ID Note