Quick Start Guide

Step 5—Standard Parameter List
PowerXL DG1 Series Adjustable Frequency Drives MN040012EN—March 2014 www.eaton.com 11
Notes
1
Parameter value can only be changed after the drive has stopped.
2
Parameter value will be set to be default when changing macros.
Standard Application—Parameters List
On the next pages you will find the lists of parameters within the respective parameter
groups. The parameter descriptions are given on Page [?], “Description of Parameters.”
The descriptions are arranged according to the parameter number.
Column explanations:
Code = Location indication on the keypad; shows the operator the present parameter number
Parameter = Name of parameter
Min = Minimum value of parameter
Max = Maximum value of parameter
Unit = Unit of parameter value; given if available
Default = Value preset by factory
ID = ID number of the parameter
Table 7. Monitor—M
Code Parameter Min. Max. Unit Default ID Note
M1 Output Frequency Hz 0.00 1
M2 Freq Reference Hz 0.00 24
M3 Motor Speed rpm 0 2
M4 Motor Current A 0.0 3
M5 Motor Torque % 0.0 4
M6 Motor Power % 0.0 5
M7 Motor Voltage V 0.0 6
M8 DC-link Voltage V 0 7
M9 Unit Temperature ? 0.0 8
M10 Motor Temperature % 0.0 9
M12 Analog Input 1 Varies 0.00 10
M13 Analog Input 2 Varies 0.00 11
M14 Analog Output 1 Varies 0.00 25
M15 Analog Output 2 Varies 0.00 575
M16 DI1, DI2, DI3 0 12
M17 DI4, DI5, DI6 0 13
M18 DI7, DI8 0 576
M19 DO1 0 14
M20 RO1, RO2, RO3 0 557
M41 PT100 Temperature °C 1000.0 27