Firmware Manual

Chapter 6—Multi-Pump and Fan Control Application
74 PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com
Notes
1
Parameter value can only be changed after the drive has stopped.
2
Parameter value will be set to be default when changing macros.
Table 60. Application Info—P21.3
Code Parameter Min. Max. Unit Default ID Note
P21.3.1 Brake Chopper Stat 646 0 = No
1 = Yes
P21.3.2 Brake Resistor 647 See P21.3.1
P21.3.3 Serial Number 648
Table 61. User Info—P21.4
Code Parameter Min. Max. Unit Default ID Note
P21.4.1 Real Time Clock 0.0.0.1:1:13 566
P21.4.2 Daylight Saving 0 582 0 = Off
1 = EU
2 = US
P21.4.3 Total MWh Count Mwh 601
P21.4.4 Total Power Day Count 603
P21.4.5 Total Power Hr Count 606
P21.4.6 Trip MWh Count Mwh 604
P21.4.7 Clear Trip MWh Count 0 635 0 = Not Reset
1 = Reset
P21.4.8 Trip Power Day Count 636
P21.4.9 Trip Power Hr Count 637
P21.4.10 Clear Trip Power Count 0 639 See P21.4.8