Firmware Manual

Chapter 6—Multi-Pump and Fan Control Application
64 PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com
Notes
1
Parameter value can only be changed after the drive has stopped.
2
Parameter value will be set to be default when changing macros.
P9.27
2
Undervoltage Attempts 0 10 1 324
P9.28
2
Overvoltage Attempts 0 10 1 325
P9.29
2
Overcurrent Attempts 0 3 1 326
P9.30
2
4 mA Fault Attempts 0 10 1 327
P9.31
2
Motor Temp Fault Attempts 0 10 1 329
P9.32
2
External Fault Attempts 0 10 0 328
P9.33
2
Underload Attempts 0 10 1 336
P9.34
12
RTC Fault 1 955 See P9.11
P9.35
12
PT100 Fault Response 2 337 See P9.11
P9.36
12
Replace Battery Fault
Response
1 1256 See P9.11
P9.37
12
Replace Fan Fault Response 1 1257 See P9.11
P9.38
12
IP Address Confliction Resp 1 1678 See P9.11
P9.39 Cold Weather Mode 0 1 0 2126 0 = No
1 = Yes
P9.40 Cold Weather Voltage Level 0 20 % 2 2127
P9.41 Cold Weather Time Out 0 10 min 3 2128
P9.42 Cold Weather Password 2129
P9.43 Under Temp Fault Override 0 1 0 2130 0 = No
1 = Yes
Table 45. Protections—P9, continued
Code Parameter Min. Max. Unit Default ID Note