Firmware Manual

Chapter 4—Startup
PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com 25
Chapter 4—Startup
Startup Wizard Page
The Startup Wizard is a sub-menu of main menu. Once user
enters into this menu, the Startup Wizard will begin.
In the Startup Wizard, you will be prompted for essential
information needed by the drive so that it can start
controlling your motor. During this process, you can also
select the application that best suits your needs.
The parameters in Startup Wizard shall be in the following
sequence: Language, Real Time Clock, Daylight Saving,
Application, Min Frequency, Max Frequency, Motor Nom
Current, Current Limit, Motor Nom Speed, Motor PF, Motor
Nom Volt, Motor Nom Frequency, Motor Nom Power,
Application Setup.
If user changes the Application, the drive and keypad will
reset.
The Startup Wizard setup is as Figure 27 shown on the
following page.