Firmware Manual

Chapter 3—Menu Overview
PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com 21
3. P21.1.6 Parameters Comparison
After the operation, the number of different parameter
will be shown. Then press the right key; the first
different parameter shall be shown.
The parameter name shall be shown in the second line,
and the value which is from keypad/default/set1/set2
shall be shown in the third line, the current value shall be
shown in the fourth line.
If the user wants to modify the current value, user shall
be able to enter the edit mode by right key.
User shall be able to browse all the different parameters
by up/down key.
During this operation, “waiting…” shall flash, which
means it is in process.
When it is finished, “OK” shall be shown. See
Figure 23.
Figure 23. Parameters Comparison