Firmware Manual

Chapter 2—Keypad Overview
10 PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com
Upgrade Page
After welcome page, keypad will check whether there is
different keypad firmware version in MCU’s serial flash. If
yes, then ask user whether to upgrade the keypad.
Figure 7. Upgrade Page
Auto Backup Page
If keypad is plugged into a new drive, then auto backup page
will be shown to notice the user whether to do the upload/
download.
Figure 8. Auto Backup Page
Soft Key Description
There are two soft key buttons. They have different
definitions under different pages.
Table 8. Soft Keys
1. In the main menu (root node), “JOG” shall be shown on
the right. If bypass is enabled, then “BYPASS” shall be
shown on the left. Otherwise, it will not be shown. See
Figure 9.
Figure 9. Main Menu
2. For the parameter group (), the two soft keys
“REVERSE/FORWARD” and “MENU” shall be shown.
See Figure 10.
Figure 10. Parent Node Page
13:53
STP FWD KEY MON
Download from keypad
No Action
Upload to keypad
Keypad
Display Page
Default
Soft Key 1
Default
Soft Key 2
Main Menu Page NULL or BYPASS JOG
Group Node Page REVERSE or FORWARD MENU
Parameter Node Page NULL or FAVORITE or RESET MENU
Favorite Page DELETE MENU
Fault Page DETAIL MENU