Setup guide

MN03902004E 2 November 2006
Figure 1: Model S811N (65 mm)
Figure 2: Model S811R (110 mm)
Figure 3: Model S811T (200 mm)
Figure 4: Model S811U (200 mm)
Figure 5: Model S811V (290 mm)
Figure 6: DIM Approximate Dimensions in Inches (mm)
Table 1: Mounting Hardware and Torque Specifications

Weight with lugs. Weight without lugs is 41 (18.6).

Weight with lugs. Weight without lugs is 91 (41.4).
Table 2: Environmental Requirements
1.97
(50.0)
.22 (5.5)
Typ. 4
Places
2.66
(67.6)
3.46
(88.0)
5.35
(135.9)
6.47
(164.4)
7.38
(187.4)
6.87
(174.5)
3.49
(88.5)
5.53
(140.5)
6.66
(169.2)
7.44
(189.0)
3.54
(90.0)
4.38
(111.3)
7.92
(201.2)
.27 (6.8)
Typ.
4 Places
6.39
(162.4)
7.67
(194.8)
11.7 7
(299.0)
Slots
12.71
(322.9)
.28 (7.1)
Slots Typ.
6 Places
5.91
(150.0)
Slots
2.95
(75.0)
Slots
5.40
(137.2)
11.77 (299.0)
Mounting
5.20 (132.0)
Mounting
Mounting
Slots for M6
(1/4) Screws
(Up to 6
Quantity)
.47
(11.9)
7.08
(179.9)
12.72
(323.1)
7.73
(196.3)
5.20 (132.0)
Pole
Centers
C
L
C
L
Frame
Size in
In. (mm)
Screw
Size
Washer
Size
Qty.
Req.
Torque
Req.
Weight of
Unit in
lb. (kg)
S811N
2.55
(65)
#10 – 32
x 0.5
Standard #10
Lockwasher & Flat
Washer
4 15 lb-in
(1.7 Nm)
5.8 (2.6)
S811R
4.33
(110)
1/4 – 20
x 0.625
Standard 1/4 in.
Lockwasher & Flat
Washer
4 25 lb-in
(2.8 Nm)
10.5 (4.8)
S811T, S811U
7.87
(200)
1/4 – 20
x 0.625
Standard 1/4 in.
Lockwasher & Flat
Washer
6 30 lb-in
(3.4 Nm)
48 (21.8)

S811V
11.42
(290)
1/4 – 20
x 1.5
Grade 8 Allen
head hex cap
screws
Quantity: 4
ID: 0.270
OD: 0.495 — 0.505
Max. 0.055 Thick
8 50 lb-in
(5.6 Nm)
103 (46.8)

Quantity: 4
Special Washer
Included with V Frame Units
Operating Temperature Range -40°F to 122°F (-40°C to 50°C)
DIM LCD -4°F to 158°F (-20°C to 70°C)
Storage Temperature Range -58°F to 158°F (-50°C to 70°C)
DIM LCD -22°F to 176°F (-30°C to 80°C)
Elevation Above 2000 meters consult factory
Humidity Functional to 95% non-condensing
Operating Orientation Any orientation in the vertical plane
Pollution Degree IEC 60947-1 3
Shock Resistance 15g in any direction
Vibration Resistance 3g in any direction
3.74
(95.0)
.27 (6.7) Dia.
Typ. 4 Places
7.35
(186.6)
15.63
(397.0)
16.57
(420.8)
9.84 (250.0)
11.05
(280.6)
15.16
(385.0)
Slots
.26 (6.5) Dia.
Typ. 4 Places
1.83
(46.4)
2.91
(74.0)
3.08
(78.3)
2.68
(68.0)
1.77
(45.0)
.91
(23.2)
.89
(22.5)
.31
(8.0)
.29
(7.5)
.49
(12.5)
.41
(10.5)
MN03902004E.fm Page 2 Tuesday, November 28, 2006 8:49 AM