User`s guide

INTRODUCTION
Eaton
®
ConnectUPSt Web/SNMP Card User's Guide S 164201405 Rev E www.eaton.com/powerquality
7
Client software is available for Microsoft Windows
®
, Mac OS
®
X, Novell
®
NetWare
®
, Linux
®
, and UNIX
®
. These programs communicate through
TCP/IP with the ConnectUPS Card and automatically shut down the
protected system during extended power outages.
In addition, the ConnectUPS Card has the following features:
S Hot-swappable, simplifying installation by allowing you to install the
card safely without powering down the critical UPS load.
S Configuration from serial port, Telnet, SSH, HTTP Web browser,
Bootp, or DHCP.
S Management from HTTP Web browser, Internet-ready cell phone or
PDA, or SNMP management software.
S E-mail notification of changes in the UPS status through SMTP
(simple mail transport protocol) via e-mail client software, a PCS
(personal communication services) phone, or alphanumeric pager.
S Support for Eaton (XUPS.MIB) and RFC-1628 Standard UPS
(STDUPSV1.MIB) management information bases.
S Firmware upgradable through a Microsoft Windows utility using a
network connection.
S Scheduling function to control UPS shutdowns and startups.
S History log files (data and events) for recording power problems.
S UPS status information available to registered NetWatch clients for
automatic shutdown of Microsoft Windows, Mac OS X, Novell
NetWare, Linux, and UNIX.
S With a special Status@aGlance page, a color-coded background on
your Web browser providing quick visibility of the UPS status.
S Monitoring of multiple ConnectUPS Web/SNMP Cards by using free
MultiView software.
S Monitoring of two normally-open or normally-closed contact devices
through a connection to the configuration port (see page 35).
S Compatible with the Environmental Monitoring Probe (EMP).