Datasheet

08/04/2017 017527 - HPL-ED2017 V34.0 EN 3 / 4
Surface finish   Galvanized
Passivated
Material�characteristics
Material   glass-fibre reinforced polycarbonate (base)
non-reinforced polycarbonate (cover)
Halogen free
Surface finish   Galvanized
Passivated
Colour   RAL 7032, pebble grey (base)
transparent, opaque (cover)
Colour   
Base   RAL 7032, pebble grey
Housing body   Transparent, colourless or RAL 7032, pebble grey
Material�properties
Electrical   
Track resistance   KB160, KC175 (base, to IEC 60112)
KB100, KC200 (cover, to IEC 60112)
Surface resistance to IEC 60093 
Ω x 10
13
1
Dielectric strength to IEC 60243-1  kV/mm 30
Thermal   
Temperature resistant   -40 °C - 120 °C (enclosure)
85 °C (enclosure bolt)
80 °C (gasket)
Mechanical   
Impact resistance   IK10 according to EN 50102
Loading capacity 
kg/m
2
10
Chemical resistance   
Chemical resistant   Resistant against: Acids < 10 %, mineral oil, alcohol, gasoline, greases, salt
solutions
Partly resistant to: Acids > 10 %
Not resistant to: alkalis, benzene
Atmospheric   
Saline spray   IEC 60068-2-11
UV resistance   Beneath protective shield
Water consumption to DIN EN ISO 62  % 0.29
Flammability characteristics   
Flammability classification according to UL94   V1 (base)
V2 (cover)
Design�verification�as�per�IEC/EN�61439
Technical data for design verification   
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees,
calculated as per IEC 60890
  
Individual enclosure for wall mounting P
V
CO 20
Starting enclosure for wall mounting P
V
CO 19
Middle enclosure for wall mounting P
V
CO 18
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees,
calculated as per IEC 60890
  
Individual enclosure for wall mounting P
V
CO 41
Starting enclosure for wall mounting P
V
CO 39
Middle enclosure for wall mounting P
V
CO 37
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Lower part: 960 °C / cover: 850 °C; meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Not relevant to indoor installations.
10.2.5 Lifting   10 kg per enclosure with support frame and lifting aid met; assembled and secured
as per the latest applicable instruction leaflet.