Installation Manual

Figure 1 Figure 2 Figure 3 Figure 4

Figure 5

Disconnect all power to equipment prior to installing fuseholder.

1. Assemble fuseholder to bracket with two 8X32 screws as shown in Figure 1.

2. Assemble fuseholder and bracket to enclosure case with 10-32 screw(s) per

Figure 2, 3 or 4 as notes below:

Size 00-0-1 Devices: Refer to Figure 2

Size 1

3/4

& 2 Non - Reversing Devices: Refer to Figure 3

Size 1

3/4

& 2 Reversing Devices: Refer to Figure 4

3. Connect control circuit conductors as shown in Figure 5 and install fuses in

fuseholder.

CAT. NO. C350FBR1 FUSEHOLDER KIT

INSTALLATION INSTRUCTIONS

P19900 1111 (Rev. 001)

PAGE 1
CAT. NO. C350FBR1 FUSEHOLDER KIT INSTALLATION INSTRUCTIONS Figure 1 Figure 2 Figure 3 Figure 4 Disconnect all power to equipment prior to installing fuseholder. 1. Assemble fuseholder to bracket with two 8X32 screws as shown in Figure 1. 2. Assemble fuseholder and bracket to enclosure case with 10-32 screw(s) per Figure 2, 3 or 4 as notes below: Size 00-0-1 Devices: Refer to Figure 2 Size 13/4 & 2 Non - Reversing Devices: Refer to Figure 3 Size 13/4 & 2 Reversing Devices: Refer to Figure 4 3.